Write At Command Station V104 __hot__ May 2026

void loop() { // Read the data from EEPROM location 0 byte data = EEPROM.read(0); Serial.print("Data at location 0: "); Serial.println(data);

Serial.begin(9600); }

The syntax of the WriteAt command is as follows: write at command station v104

delay(1000); } In this example, we write the values 10 and 20 to EEPROM locations 0 and 10, respectively. Then, we read the data from these locations and print it to the serial console. void loop() { // Read the data from

// Write another byte to EEPROM location 10 EEPROM.writeAt(10, 20); Serial.print("Data at location 0: ")